All About The Landscape Daily

The Best Ways To Clean and Protect Your Concrete Floors

Aug 17

Staining is a process that can be completed efficiently and affordably to enhance the look of concrete surfaces. The flooring type is produced by pouring a water-based solution on an existing concrete surface which is cleaned.


Concrete Staining

Sealers are utilized to shield staining materials from wear or fade. Concrete is extremely absorbent and can stain in any color you can imagine. There are many chemical and process options for concrete staining Albuquerque. They are available in various shades and colors.


What are the different kinds of concrete stains?


It's possible to divide the concrete stains into two types:


Concrete can be stained with a reactive chemical.

Reactive concrete stains are usually constructed from inorganic metallic salts or hydrochloric acid. These react with concrete minerals. The chemical reaction creates a permanent bond to concrete and can etch the surface to create marble-like effects.


Acid and reactive stain types offer fewer color options than non-reactive or water-based stain types. They also require higher safety precautions.


Concrete Staining That's Not Reactive

Non-reactive stains, water-based acrylic polymers, and pigments can be manufactured without needing a chemical reaction. It's designed to go further into the concrete and then deposit color particles into the open pores of the concrete surface.


A sealant is applied to the area to keep stains from peeling, flaking, and discoloring.


Polymer-bonded technology in water-based stains is one example. It reduces the likelihood of stain peeling away, discoloring or flaking. All the while being environmentally friendly.


Water-based stains are getting increasingly popular since they come in various tones and colors. They range from subtle transparent colors to vivid solids.


Mixing non-reactive colors to create new colors has no adverse effects because they don’t react with concrete. Non-reactive stains, on the other hand, do not contain acids or solvents, making them simpler to apply.


Concrete staining Albuquerque is both reactive and non-reactive. It's a great way to rejuvenate old surfaces like countertops, concrete slabs, and patios.


The Staining Process for Concrete


Concrete staining Albuquerque is a straightforward however time-consuming procedure that can take two days to finish. The following steps are needed to strain concrete:


Concrete Surface Preparation

  • It is not important how old concrete is; careful surface preparation is essential.

  • Mechanical grinding or concrete cleaners and degreasers effectively clean the concrete surface to remove all debris, residues, and grime.

  • Any stain or coating that is already present on concrete should be removed before staining.

  • Concrete crack sealants are utilized if there are any.

  • To clean up any scratches, cleaning your floors with a floor cleaner is used.


Methods of Staining


  • Tape can be applied to any surface exposed to prevent stains from settling.

  • To get the desired color, The stain is then gently dispersed with water.

  • The coating can be applied with an airless sprayer or a brush.

  • In accordance with the temperature, humidity, and airflow, the freshly applied stain may require between 10 and 10 hours to dry completely.

  • For a darker shade, follow the same steps like before.


Eliminating the Spillage

  • Cleanse the concrete thoroughly with clean water to eliminate any remaining residue.

  • T.S.P. or baking soda can neutralize acid-based stains.

  • Using a brush, the final rinse is used to remove any remnants.

  • Putting on an adhesive

  • Concrete sealers can be used to help maintain the stain-resistant properties of concrete.

  • The concrete must be allowed to cure for a minimum of one day following the sealants having been applied.

  • It is advised to apply two coats of sealer to get the longest longevity.


Concrete Contractors Albuquerque

5416 La Colonia Dr NW, Albuquerque, NM 87120